| Environmental Cooling Systems (ECS) | |
 |
| |
Monitoring air flow in aircraft ECS is critical to ensure the adequate cooling of critical areas, such as, the avionics manifold.
vent-captor is typically installed in the secondary air supply lines that lead to the avionics manifold, cargo areas and main cabin. The solid state output can be set over a wide flow range from 0.25-100 SPPS. |
| |
| Oil Cooling Systems | |
 |
| |
Model 4204/4050.31 flow-captor monitors critical transformer cooling oil flow rate, and temperature on high speed train.
flow-captor is ideal because of its dual output capability, permitting the monitoring of flow rate and temperature of the dielectric heat transfer cooling oil. |
| |
| Pulverized Coal Flow Detection | |
 |
| |
vent-captors are located in 1 inch diameter nozzles at 30 degree angles to the direction of coal flow.
The nozzles are open-ended to the coal feeder lines. As long as coal is flowing, a suction will be created and fresh air will be pulled into the suction line past the vent-captor.
if a coal feeder line is blocked, the vent-captor will signal the operator before any damage occurs to associated equipment. |
| |
| Agitation Detection | |
 |
| |
flow-captor can be used to detect agitation in various processes. The flow-captor is calibrated to sense the difference in heat transfer properties between the still and agitated media, as well as the difference )between wet/dry & product interface conditions.
The flow-captor can be equipped with a dual output, one to detect agitation, the other Output set to shut off the agitator if the product level drops below a specified point. |
| |
| Monitoring Product Flow for Pump Protection | |
 |
| |
Positive displacement and centrifugal pump systems can be saved from costly dry or low flow operation damage by monitoring flow with flow-captor type 4120.13.
flow-captor is effective in virtually all media, including slurries & viscous products.
Our flow-captor is easily incorporated into existing control circuitry to actuate pump shutoff in a low, or no-flow situations. By powering the flow-captor from the pimp contra circuit, the unit will also shut itself off along with the pump to prevent unnecessary dry operation and false alarming. |
| |
| Water Flow Monitoring | |
 |
| |
In wastewater treatment plants, flow-captor helps ensure the correct amount of water is analyzed in order to determine the quantity of chemicals needed.
The no moving parts reliability of the flow-captor eliminates the possibility of human error resulting in plant failure and consequent damage. |
| |
| Hot Metal Detection | |
 |
| |
- Maintenance-Free
- Shock &Vibration Proof
- High Temperature Proof
- Artificially Aged Infrared Diode
- Long Service Life Range of Optics
Typical Applications: - Detect Hot Spots on Conveyors in Incineration Plants
- Material Tracking in Steel Mills
- Reliable Detection of Hot Metal Components
|
| |
| Radar Air Cooling Systems | |
 |
| |
vent-captor has long been used for industrial HVAC systems. Radar air cooling systems have demanded high reliability for air flow measurement and switching.
vent-captor is the perfect choice for this application, because of its no moving parts design and wide flow range for switching and monitoring. |
| |
| Proximity Detection | |
 |
| |
- Large Detection Distance
- Complete Program for Innovative Problem Solutions
- Shock & Vibration Proof
- High Temperature Proof
- Long Service Life
- Switching or Analog Versions
- Special Versions
Typical Applications: - Conveyor Control
- Counting
- Roller Controls
- Edge- & Center Control of Coilers
|
| |
Applications